Posted by Gardening | Posted in Garden Statues and Yard Art | Posted on 02-01-2012
Tags: casting, concrete, diy, mold, mold concrete, mold concrete basement walls, mold concrete block, mold concrete floor, mold concrete walls, molds
 Concrete mold Deluxe Bench Leg rubber fiberglass US $199.00 
|
 Concrete mold Cute Snail rubber fiberglass US $125.00
|
 Concrete Bench Top Mold US $18.50
|
 Concrete Garden Gnome Mold US $16.50
|
 Concrete mold Girl with Grapes rubber fiberglass US $175.00
|
 BEAUTIFUL KNEELING ANGELLATEX MOLDCONCRETE PLASTER US $47.00
|
 Concrete mold Large Deluxe Iguana rubber fiberglass US $225.00
|
 SM FROG COVERING EARSLATEX MOLDCONCRETE PLASTER US $8.00
|
 CHIPMUNKLATEX MOLDCONCRETE PLASTER US $8.00
|
 KISSING PIGSLATEX MOLDCONCRETE PLASTER US $12.00
|
 Concrete mold Bamboo Birdbath Top rubber fiberglass US $150.00
|
 Concrete mold Bambo Birdbath Base rubber fiberglass US $199.00
|
 Aluminum Concrete Mold Large Swan planter US $107.50
|
 Aluminum Concrete Mold Large Frog planter US $152.50
|
 Rubber Fiberglass Concrete Mold of a Lion Cub with Lamb US $46.00
|
 Rubber Fiberglass Concrete Mold KITTEN IN BOOT US $33.72
|
 Rubber Fiberglass Concrete Mold GARDEN FAIRY STATUE US $46.55
|
 Concrete mold Guardian Lion Left rubber fiberglass US $212.50
|
 Concrete mold Guardian Lion Right rubber fiberglass US $212.50
|
 Concrete mold Antique Stone Lion rubber fiberglass US $61.00
|
 Concrete mold Bashful Girl rubber fiberglass US $68.00
|
 Concrete mold Boy with fish AKA Dolphin Boy rubber fiberglass US $56.00
|
 Concrete mold Large Angel Bust rubber fiberglass US $11.50
|
 Concrete mold Greecian woman with jug rubber fiberglass US $163.02
|
 LARGE VINTAGE HEAVY CAST ALUMINUM CONCRETE CEMENT FOUNTAIN NUDE WOMAN MOLD US $102.50
|
 NEW16 Elegant Venetian Column Edge Paver Concrete Mold US $39.95
|
 ALUMINUM CONCRETE CEMENT STUMP MOLD US $69.99
|
 BOY GIRL PLAYING HORNLATEX MOLDCONCRETE PLASTER US $40.00
|
 LARGE ROCK FACE PLANTERLATEX MOLDCONCRETE PLASTER US $30.00
|
 FLOWER POT MANLATEX MOLDCONCRETE PLASTER US $27.00
|
 FROG FLOWER POTLATEX MOLDCONCRETE PLASTER US $38.00
|
 FROG ON GAZING BALLLATEX MOLDCONCRETE PLASTER US $22.00
|
 TREEFACE PLANTER3LATEX MOLDCONCRETE PLASTER US $18.00
|
 CUTE TURTLES PLANTERLATEX MOLDCONCRETE PLASTER US $14.00
|
 PINEAPPLE BIRD FEEDER BLATHLATEX MOLDCONCRETE PLASTER US $120.00
|
 SMALL ROCK FACE PLANTERLATEX MOLDCONCRETE PLASTER US $25.00
|
 FROG WELCOMELATEX MOLDCONCRETE PLASTER US $37.00
|
How do I remove the dirt and mold smell after I ripped up the old floor in the bath? It is a slab concrete .?
I am remodeling the bath and took up the old 12x12 sheets of flooring. It now smells like dirt and mold and the floor is black. It is a slab home so it is concrete there. How do remove the smell?
Luckily it's concrete...
Open the window or run the fan even place an extra fan if you have one or can borrow one. Vacuum the floor.
Scrape up what you can wearing protective gear.
Then
Fill a spray bottle with bleach ****dress in disposable clothing and remove any towels or shower curtains or other objects that can get hurt by an over spray **** Spray the floor and let it dry..continue to spray the floor lightly over the next few hours until the mold disappears. Put a towel at the outside entrance to the bath so the bleach smell does not permeate the house.
It may take 3 or more spray applications. Keep the window open and run the fan during this time. When the mold lightens you needs to scrub with a stiff utility broom then rinse the floor with a galley mop and HOT water. You can do this between applications to allow use of the bathroom.
When the floor is to your approval you aren't finished...You will need to wash it with detergent and again rinse it clean. The floor must be thoroughly dry and clear of mold before putting a new floor down.
I suggest doing this over a course of several days to allow use of the bathroom when you aren't treating it. Also to insure that the floor is 100% clean and dry before laying the new floor.
There are 2 options if the floor is not responding.
Muriatic acid - This may not even be available where you live.
And sealer - Sealing the concrete before applying your new floor is highly recommended.
Consider using Dricore as a sub floor before your new install. http://www.dricore.com/en/eIndex.aspx
Remove Mold from Basement
Mold can grow where the area is wet and which receives little sunlight. A basement is place where the moisture is relatively high, so it provides best suitable environment for the mold to grow. As the mold formation getting high it can become more and more hazardous for the human health. It is important to remove mold from the basement as soon as possible and to keep the basement dry to prevent any further mold formation. There are some steps mentioned below to remove mold from basement.
- Check out the basement and find out the sources of water which causes the moisture. These can range from leaking pipes, a washing machine, high humidity, or water seeping in through the floors or walls. Resolve the water problem that making your basement wet.
- Mold can also grow on the things like boxes, furniture, rugs or anything wooden. If you find any like these remove it from the basement.
- Scrape off visible mold with a spatula. Remember wear glows and mask when you are removing it. Place mold in heavy-duty garbage bags and remove these bags to the nearest exit.
- You can use a non-metallic spatula if mold has formed on wood paneling in order to avoid scratching the wood.
- After cleaning mold which is visible easily and can be cleaned now it's the time to clean the things properly to prevent any further mold formation. Prepare a solution with chlorine bleach in water mixed with laundry detergent. You should add a cup of bleach and one-half of detergent for each gallon if the surface is of concrete. For the wood paneling it is preferred to try a weaker solution with very little amount of bleach and detergent.
- First apply on a small portion to evaluate if there is any adverse effect. Apply this with sponge or spray.
- Now with a sponge or brush scrub the mold. Do not use brush for the wood paneling.
- Clean the area with water once and evaluate if it needs further treatment or not. If needed then again apply the solution and make it clean.
- Dry out the area properly. You can use rag or fan for that. Make the arrangement of proper ventilation so the area dried out properly.
- Check the basement area frequently to prevent the future mold formation. Apply proper treatment time to time and maintain the place dry.
About the Author
This article has been provided courtesy of http://www.moldremovaltampafl.com. Mold Removal Tampa FL is a PuroClean of Tampa Bay providing mold removal services, home mold removal, mold cleaning services and mold inspection Tampa with mold removal specialist available 24/7.
Stylish Garden Decor:
